INTEGRATED in the news

High Voltage Simulation- Case Study: Integrated Engineering Software

HSP Use INTEGRATED’s Modelling Software for HVDC Bushings

May 13, 2010 - Power Systems Design
HSP specialises in high voltage bushings and capacitors for transformers used in projects around the world including the Three Gorges hydroelectricity project in China. The company combines its long history of specialist know-how with modern production methods that it has adapted to suit specific material requirements. However, it considers that its differentiator is the company’s commitment to the extensive test programmes in it runs on all equipment produced in its works. Read more

The Best Way to Model Magnetic Fields

May 3, 2010 - Machine Design
Most standard software for modeling magnetic fields uses the standard finite-element method. For some problems, however, an alternate boundary-element formulation can be much more efficient.

To understand the difference between the methods, it helps to recall a bit of theory. Magnetics fields are governed by Maxwell’s equations. Maxwell’s equations can be expressed in either differential or integral form. Read more

Version 8.0

December 16, 2009 - Scientific Computing World
Integrated Engineering Software has announced updates to its entire product range. Version 8.0 of the company's software features a number of general enhancements that will make the software easier and quicker to use. In addition, improvements have been made specifically to the 2D and 3D modelling products. Read more

Updates to entire software product range

November 23, 2009 - Electrical Review
Intergated Engineering Software, a developer of hybrid simulation tools for electromagnetic, thermal and structural design analysis, has today announced updates to its entire product range. Version 8.0 brings a number of new general enhancements which will make the software easier and quicker to use, in addition, improvements have been made specifically to the 2D and 3D modeling products. Read more

Lorentz

November 10, 2009 - Scientific Computing World
Read more

Update for software package

November 3, 2009 - Electrical Review
Integrated Engineering Software has today announced updates to its Lorentz software. Available in 2D/RS (rotationally symmetric) and 3D packages, Lorentz, uses proven field solver technology to achieve effective simulation for applications requiring charged particle and beam analysis. Read more

Magnetic modelling at heart of new design

September 20, 2009 - Electronic Product Design
Creating a magnetic bearing / drive system for a new centrifugal rotary blood pump was simpler when dedicated software was used as Andrew Hilton and Geoff Tansley explain.

Worldwide there are 8.75 million deaths each year due to Congestive Heart Failure (CHF). This figure is rising by 10% per annum. Currently the only long-term treatment available is a heart transplant, with 3000 people a year undergoing this procedure, but this is reliant on donor organs. One solution to this, either as a bridge to transplantation or recovery, is to use an implantable blood pump. Read more

A Trustworthy Simulation Tool - Case Study

September 16, 2009 - Design World
Paul Stoving, Senior Design Engineer at Cooper Power Systems, explains how and why INTEGRATED’s oldest customer is still using ELECTRO, 22 years after they first purchased it. Read more

High voltage design

September 16, 2009 - Connecting Industry
According to Steve Ainsworth of Dart Research, modelling software is the essential component of a design engineer's toolkit.

Dart Research is developing high energy electron beam systems for use in x-ray inspection. It has a particular interest in difficult cross-disciplinary design problems. Read more

Simulating antennas

August 25, 2009 - Electronic Product Design
Electromagnetic simulator for high frequency applications including large phased array antennas. Read more

New LORENTZ version 7 with meniscus calculation capabilities

August 10, 2009 - Cern Courier
LORENTZ simulation software now includes meniscus calculations for charged particle extraction from a plasma source. Read more

Software helping to keep options open

August 7, 2009 - Connecting Industry
Integrated Engineering Software has introduced an enhanced version of its AMPERES 3D electromagnetic field solver software. Read more

Simulating the factory

August 4, 2009 - The IET
It's not just components and products that are now simulated and tested in software ... Read more

Adaptive Meshing Increases Confidence

July 27, 2009 - Desktop Engineering
For added accuracy and confidence in electromagnetic simulations, a mesh that can appropriately adapt will help with boundary element and finite element methods. Read more

Singula (update)

July 22, 2009 - Scientific Computing World
Integrated Engineering Software has released further updates to its Singula electromagnetic simulator tool, meaning it can now simulate large phased array antennas. Read more

INTEGRATED Finds SINGULA Solution

July 17, 2009 - Microwave Journal
Read more

Internet is great leveller for high-tech firm in city

Company built around simulation technology

June 15, 2009 - Winnipeg Free Press
If two Winnipeg entrepreneurs had listened to the naysayers, they and their highly specialized computer-software company would have been long gone by now. Read more

Redesigned blood pump could save lives and dollars

June 1, 2009 - Medical Design
Design changes made to centrifugal blood pumps could reduce the total cost of these life-saving devices by as much as 95%. Currently pumps cost about $68,000. Read more

IREQ Uses Simulation Software to Analyze Magnetic Flux Density Near Power Lines

June 1, 2009 - Transmission & Distribution World
Anywhere electric power is created, electric and magnetic fields are produced. At lower voltages and currents, the fields produced are normally of little concern. However, at high-voltage or high-current levels, the distribution of the electrical and magnetic fields must be carefully taken into account to improve equipment reliability and to protect the public and the workers. Read more

Beam Simulation Software can perform meniscus calculation

May 28, 2009 - ThomasNet
Read more

Integrated Engineering Software turns 25

May 26, 2009 - Scientific Computing World
Read more

Integrated Engineering Software celebrates its 25th anniversary by launching its 'Referral Program'

May 22, 2009 - Electronics World
Read more

Lorentz Version 7

May 13, 2009 - Scientific Computing World
Read more

Amperes v7.0

May 1, 2009 - Scientific Computing World
Read more

Modelling transformers for high-voltage power distribution

April 28, 2009 - Engineer Live
Dr Beriz Bakija discusses the benefits of modelling, designing and testing transformers.
Transformers are used for the transport of energy from power plants to consumers all over the world. Siemens AG offers tailored solutions which it develops and manufactures in the form of high- and medium-voltage switchgear, transformers and substations, automated power supply networks and service infrastructures. Read more

INTEGRATED Engineering Software launches enhanced 3D magnetic field solver

April 23, 2009 - Electrical Review
Read more

2D magnetic solver enhanced in V7.0

April 20, 2009 - Industrial Technology
Read more

Magneto version 7.0

April 2, 2009 - Scientific Computing World
Read more

Simulation Software effectively models voltage interference.

April 2, 2009 - ThomasNet
ELECTRO v7.0, suits designers of high-voltage applications. With support for analysis of full wave impulse transient sources, such as lightning, Read more

Predicting the performance of ‘big-ticket’ electricals

April 1, 2009 - Design Products & Applications
When you build complex electrical components such as high voltage power transformers, you cannot guarantee absolute levels of consistency from one product to the next. But you can be confident that each product will meet its performance expectations through the use of computer based simulation. Jacomo Ramos talks to DPA about the benefits that software modelling can bring to the design and test of such equipment. Read more

Enhanced 2D magnetic solver software allows designers rapid and sophisticated handling of transients

March 31, 2009 - Electrical Review
Read more

Design software - Improve reliability while reducing costs

March 9, 2009 - Electrical Review
As computer power continues to increase, and software algorithms advance, the demand for more complex simulations continues to increase. Read more

Analytical visualization uncovers more detail

March 2, 2009 - Desktop Engineering
In this second installment in DE’s deeper exploration into visualization, we take a look at its integration with analysis. Read more

Modeling power transformers cuts production costs

March 2, 2009 - Scientific Computing World
Modeling transformers for high-voltage power distribution is a complex task. The use of modeling to test designs has been shown to cut costs and supply flexibility, ... Read more

Coulomb version 7.0 3D electric field solver

March 2, 2009 - Scientific Computing World
Integrated Engineering Software has launched an enhanced version of its Coulomb 3D electric field solver software. Read more

Simulations software now models voltage interference

February 27, 2009 - Design Products & Applications
Integrated Engineering Software has developed a new feature for its Electro electric field solver software, which accurately models transients such as lightning strikes. Read more

INTEGRATED launches enhanced version of its COULOMB 3D electric field solver

February 26, 2009 - Electric Energy Online
Read more

Q5 Interview - Bruce Klimpke, Integrated Engineering Software

February 4, 2009 - Electronics Weekly
Bruce Klimpke, Technical Director, Integrated Engineering Software, talks to Electronics Weekly about changing design strategies in response to the downturn, opportunities in the current climate, and achieving more cost-effective design processes. Read more

Electric field solver speeds up product development

February 4, 2009 - Design Products & Applications
Read more

Electric field software support high voltage, transformer apps

February 3, 2009 - Transmission & Distribution World
Read more

CAD/CAM software features material manager

February 2, 2009 - ThomasNet
ELECTRO v7.0 allows designer to create custom material libraries which can be shared with different models and subsequent designs. Read more

ELECTRO 2D v7.0 electric field solver software

January 22, 2009 - Printed Circuit Design & Fabrication
Read more

Electro v7

November 25, 2008 - Scientific Computing World
Read more

IES electric field solver software now in version 7.0

November 21, 2008 - Design Products & Applications
Read more

Industry update: analysis & simulation software

November 1, 2008 - Nasa Tech Briefs
In our annual poll of executives at leading analysis and simulation software companies, we posed questions dealing with virtual prototyping, multiphysics, the roles of the designer and analyst, and how software vendors are helping their customers remain competitive. Here’s what they had to say about major changes in their market, and how new technology will benefit users. Read more